 
Las Posas Road, Camarillo, CA - An Ongoing Rail Crossing Deathtrap 
On February 23, 2015, a Metrolink passenger  train struck a Ford F-450 work truck and trailer at the intersection of Fifth St. and Rice Ave.  near Oxnard, California. Scores of passengers were injured and one week later, Senior Engineer Glenn  Steele
 succumbed to his injuries. Dismayed by the number of recent rail  
collisions at that site, I researched and wrote about that grade 
crossing and  its many safety deficiencies. Later, I created a website 
that featured both  problems and solutions for that troubled location at
 www.5thandrice.com.
U.S. Representative Julia Brownley (D-Agoura Hills) has taken a  special interest in the 5th & Rice Grade crossing. Recently, through her  staff, she contacted Mr.  Marc Gerstel,
 a person injured in the February 2015 collision. Brownley’s  office 
told Gerstel that the California Public Utilities Commission (CPUC)  
would soon visit the site and conduct a safety evaluation at the Fifth 
and Rice  grade crossing. If so, that would be the first substantive 
action taken by any  public agency or corporation involved with the 
operation and safety of that deadly grade crossing.
The Fifth and Rice grade crossing in Oxnard is both the busiest and the 
most hazardous commercial rail crossing in Ventura County. In the past  
decade, it has produced more rail related deaths and injuries than any 
other  crossing in the county. Even so, two grade crossings in nearby 
Camarillo now vie  for the title of “deadliest rail crossing in Ventura 
County”.
 At
 5:50 AM on August 24, 2012, between Pleasant Valley Road and Las Posas 
Road,  a Metrolink passenger train bound for Los Angeles struck a 
semi-truck and  trailer that had slowed to make a turn into a nearby 
farm field.  In that collision, both the truck driver and his passenger sustained  non-fatal injuries.
At
 5:50 AM on August 24, 2012, between Pleasant Valley Road and Las Posas 
Road,  a Metrolink passenger train bound for Los Angeles struck a 
semi-truck and  trailer that had slowed to make a turn into a nearby 
farm field.  In that collision, both the truck driver and his passenger sustained  non-fatal injuries.
On December 30, 2013 at 10:49 AM, as an Amtrak train was passing by, a 
car  entered the grade crossing at Fifth Street and Las Posas Road. The 
resulting collision sent the car into the side of a railroad service 
truck,  which was standing nearby. The driver of the first vehicle died 
at the scene and  the railroad service worker received injuries 
resulting from the accident.
On
 January 24, 2014 at 10:30 AM, crews responded to a train collision at 
Fifth Street and Las Posas Road in Camarillo. At that  grade crossing, a
 seventy-seven year old woman drove her minivan into the side  of a 
passing Amtrak train. The driver, identified as Misty Jill Wood 
succumbed  to her injuries at the scene. A Union Pacific Railroad worker
 in a nearby truck  received moderate injuries. There were no injuries 
among the passengers on the  northbound Amtrak Pacific Surfliner train.
On the evening of March 1, 2015, less than two weeks after the Oxnard 
Metrolink  collision, a passenger vehicle stopped on the tracks at Fifth
 Street and  Pleasant Valley Road in Camarillo. Moments after the two 
occupants of the  passenger car exited the vehicle; an Amtrak passenger 
train heading for Los  Angeles struck and sent  the mangled vehicle into a nearby ditch. No injuries resulted from the  collision.
 At 8:25 AM on April 23, 2015, less than two months after the Oxnard Metrolink  collision, a Union Pacific freight  train collided with a white Ford Explorer
 at the intersection of Fifth  Street and Las Posas Road in Camarillo. 
Driver Timothy Newhouse, a fifty-seven  year old man from Rialto, 
California drove through the crossing gate arm and  into the side of the
 freight train. According to officers called to the scene,  the vehicle 
rolled three or four times before coming to a rest in a nearby  ditch. 
The driver succumbed to his injuries at the scene. There were no other  
injuries.
At 8:25 AM on April 23, 2015, less than two months after the Oxnard Metrolink  collision, a Union Pacific freight  train collided with a white Ford Explorer
 at the intersection of Fifth  Street and Las Posas Road in Camarillo. 
Driver Timothy Newhouse, a fifty-seven  year old man from Rialto, 
California drove through the crossing gate arm and  into the side of the
 freight train. According to officers called to the scene,  the vehicle 
rolled three or four times before coming to a rest in a nearby  ditch. 
The driver succumbed to his injuries at the scene. There were no other  
injuries.
At 2:05 PM on September 21, 2015, a pedestrian stepped on to the tracks 
near  Fifth Street and Pleasant Valley Road in Camarillo. Moments later,
 a moving  Amtrak train struck and killed that pedestrian. The incident 
appeared to be a suicide,  but detectives responded to investigate. 
There was little else reported about  that deadly incident.
At
 10:30 AM on November 21, 2015, the latest in a string of deadly train  
collisions occurred at the Fifth Street and Las Posas Road grade 
crossing in  Camarillo. According to the California Highway Patrol, at 
the time of the  collision, the crossing gate arm was down and the 
safety lights were flashing.  For unknown reasons, Mr. Brian Kuczynski, 
twenty-three, of Camarillo drove his  car through the crossing gate and 
into the side of a moving Amtrak train. After  Kuczynski's car  hit the crossing arm and moving train,
 it travelled 171 feet and into a  nearby ditch. Flown by helicopter to 
Los Robles Hospital & Medical Center in  Thousand Oaks with major 
injuries Kuczynski later died. There were no other  injuries.
The infamous Fifth Street and Rice Avenue grade crossing in Oxnard still
 holds  the record in Ventura County. In that regard, it is the worst of the worst
  throughout the Oxnard Plain. Still, in little more than the past three
 years,  seven train collisions at either Pleasant Valley Road or Las 
Posas Road grade  crossings resulted in five deaths and four injuries. 
If this pace continues, we  can expect an average of two additional 
fatalities at the Las Posas and Pleasant  Valley rail crossings each 
year.
Assuming that only the  pedestrian fatality
 at Pleasant Valley Road was a suicide, why have so many  motorists 
collided with moving trains at those two crossings? It is easy enough  
to pass off these collisions to inattentive or distracted  drivers.
 With mobile telephones, voice activated apps, GPS navigation  systems 
and sound-deadening insulation in our vehicles; it is easy to become  
self-absorbed and inattentive to unexpected safety threats. When driving
 across  the Oxnard Plain, verdant strawberry and vegetable fields, 
light traffic and  hazy morning sunshine can lull a motorist into a 
false sense of security.
The Federal Railroad Administration (FAR)  sets the minimum standards for railroad grade crossings. The minimum  requirements include a “crossbuck”,
  which is a large “X” shaped sign that reads “Railroad – Crossing”, at 
least two  flashing red lights adjacent to the crossbuck and appropriate
 painted safety  lines in the roadway. This configuration applies to 
both directions of travel.  At the Fifth and Rice crossing, there is an 
additional red warning signal. It  resides on a horizontal strut that 
extends from the crossbuck mast over one lane  of southbound Rice Ave. 
traffic. Additionally, automatic gates descend to block  the roadway 
whenever a train approaches. As such, all three of the grade  crossings 
in question meet only the 1986 minimum federal standards for “active  
traffic control devices” at multi-lane grade crossings.
Although
 revised in 2007, the bulk of the Federal Highway Administration’s  
“Railroad-Highway Grade Crossing Handbook” derives from the 1986 version
 of that  document. In essence, “active traffic control devices” have 
changed little in  the past thirty years. In the 1986 update, the 
Federal Highway Administration  responded to rapid urbanization and 
concomitant increases in both vehicular and  train traffic across the 
country. Until that time, passive warning systems were  the norm.
Beginning with the 1986 standards, there was an attempt to update 
warning light  systems beyond the legacy systems still utilized in many 
rural and urban  locations. Looking back at the history of warning 
lights, the first active  warning system consisted of a railroad worker swinging a red  lantern
 back and forth to warn motorists of an approaching train. Later  
railroad safety engineers introduced the “wig  wag”, which featured a 
pendulum arm that contained a red warning light. As a  train approached,
 the lighted wig wag signal swung back and forth. In doing so,  the wig 
wag mimicked a railroad worker's lantern swinging at arm's length.
 
departs the station at Orange Empire Railroad Museum.
The major improvement in 1986 was to require two red warning lights that flashed in sequence. The timing of the flashes mimicked both a wig wag and the railroad lantern of old. Despite the advent of light emitting diodes (LEDs), most flashing light signals still utilize low wattage bulbs, varying from 16 to 36 watts. Even with reflectors behind the low wattage bulbs, a light within the dark red glass of the “roundel” can be difficult to see during daylight hours. Over eight percent of men experience color blindness in the red spectrum. That means that almost one man in twelve might see a flashing signal light, but not detect it as a red warning light.
 The
 automated safety gates found at “active traffic control grade 
crossings”  create another area of concern. Designed to activate not 
more than three seconds  after the safety warning lights begin to flash,
 the motorized gates take time to  arrive at their “down position”. So 
long as the gates are down prior to the  arrival of a moving train, they
 meet legal requirements. Regardless of a gate  length of up to 
thirty-eight feet, only three red lights are required to meet  federal 
standards. The red light at the tip of the gate arm burns steadily,  
while the other two flash alternately.
The
 automated safety gates found at “active traffic control grade 
crossings”  create another area of concern. Designed to activate not 
more than three seconds  after the safety warning lights begin to flash,
 the motorized gates take time to  arrive at their “down position”. So 
long as the gates are down prior to the  arrival of a moving train, they
 meet legal requirements. Regardless of a gate  length of up to 
thirty-eight feet, only three red lights are required to meet  federal 
standards. The red light at the tip of the gate arm burns steadily,  
while the other two flash alternately.If we were to recreate a mid-morning scene of a typical Las Posas Road train collision, here is what the errant driver might see. Approaching the tracks from the north, the morning sun would be coming in the driver’s side window, possibly dazzling his or her eyes. As the train approaches at full speed, it might appear as a dot on the horizon or not be visible at all. Whether distracted, speeding or fully attentive, the driver may or may not see the two low-wattage red warning lights flashing in their roundels. Likewise, the driver may not see the slender gate arm descend from vertical to its horizontal (closed) position. By the time the driver notices the flashing lights, the safety gate and the train, it may too late to avoid a catastrophic collision.
 Much
 has changed since enactment of the 1986 grade crossing standards. Our  
driving experience now includes cup holders, mobile telephones, 
integrated  information and entertainment systems, and texting while 
driving. The result is  a quantum leap in potential distractions 
available to drivers today. The attitude of many who  comment on 
relevant websites is “drivers  beware”.
 If you drive into the side of a moving train, it is probably your  
fault, they write. Your own death or dismemberment, they say, proves 
their  point. In reality, the FRA minimum standard developed for grade 
crossings in  1986 are often insufficient to warn motorists of impending
 collisions with  moving trains.
Much
 has changed since enactment of the 1986 grade crossing standards. Our  
driving experience now includes cup holders, mobile telephones, 
integrated  information and entertainment systems, and texting while 
driving. The result is  a quantum leap in potential distractions 
available to drivers today. The attitude of many who  comment on 
relevant websites is “drivers  beware”.
 If you drive into the side of a moving train, it is probably your  
fault, they write. Your own death or dismemberment, they say, proves 
their  point. In reality, the FRA minimum standard developed for grade 
crossings in  1986 are often insufficient to warn motorists of impending
 collisions with  moving trains. With
 five of the recent train collisions at Las Posas Road and Fifth Street 
 happening between 8:30 AM and 2:30 PM, further assessment of both 
natural light  and traffic control signal lighting is in order. With 
Fifth Street creating a  buffer for northbound vehicular traffic, almost
 all of the Las Posas Road train  collisions involve southbound 
vehicular traffic. From morning until  midafternoon, the sun may 
interfere with the driver’s ability to see the  obsolete warning signals
 and other faded safety markings at Las Posas Rd.,  Pleasant Valley Rd. 
and Rice Ave. grade crossings.
With
 five of the recent train collisions at Las Posas Road and Fifth Street 
 happening between 8:30 AM and 2:30 PM, further assessment of both 
natural light  and traffic control signal lighting is in order. With 
Fifth Street creating a  buffer for northbound vehicular traffic, almost
 all of the Las Posas Road train  collisions involve southbound 
vehicular traffic. From morning until  midafternoon, the sun may 
interfere with the driver’s ability to see the  obsolete warning signals
 and other faded safety markings at Las Posas Rd.,  Pleasant Valley Rd. 
and Rice Ave. grade crossings.Perhaps the pending CPUC investigation of the Rice Avenue grade crossing will give impetus Sealed Corridor traffic safety features at the three most deadly railroad grade crossings in Ventura County. In the interest of safety for all who travel the Oxnard Plain in motor vehicles and passenger trains, I hope so.
By James McGillis at 05:12 PM | Railroad Safety | Comments (0) | Link

 
 








