Canyonlands Field - Moab, Utah
"UPS Air, Moab Style"
On my way from Green River to Moab, Utah, I turned at Crescent Junction and then drove south on U.S. Hwy. 191. For the first ten miles, there was little to see except open sky and sparse desert vegetation. Four miles short of Canyonlands Field, better known as the Moab Airport, I spotted a landmark tower about one quarter mile from the highway.
As steel communications towers go, this one is not unique, but it does have character. The only similar towers I have seen were near Oildale, California in  the
 1950s. With latticework construction reminiscent of the Eiffel Tower, 
the Moab Tower is tall and sturdy. Between its struts and a catwalk near
 the top, it almost screams, “I am an old oil derrick”. As it turns out,
 the tower was once part of the AT&T microwave tower network.
the
 1950s. With latticework construction reminiscent of the Eiffel Tower, 
the Moab Tower is tall and sturdy. Between its struts and a catwalk near
 the top, it almost screams, “I am an old oil derrick”. As it turns out,
 the tower was once part of the AT&T microwave tower network.
Although the attached antennas and parabolic dishes 
bespeak of wireless communications, the tower’s oil patch looks left me 
wondering who specified such a robust structure and when. Internet 
searches yield nothing to indicate who owns the tower or its specific 
use. Since terrain in that area is relatively flat, it appears to be a 
transfer point for communications between Moab and Crescent Junction to 
the north.
After pondering the tower for a few moments, I 
traveled on to Canyonlands Field. There, I met with Mr. Chris Bracken a 
pilot and mechanic at Redtail Aviation .
 Chris’s easygoing nature belies the fact that he is adept at both 
flying and repairing complex aircraft. The day I was there, Chris was 
working on a tail-replacement for an old Cessna aircraft. With his 
thoroughness, Chris had noticed that a factory replacement part sent 
from Cessna, did not match the bent one he was replacing. His call to 
Cessna in Kansas got them scrambling on a potential recall of other 
similar faulty parts.
.
 Chris’s easygoing nature belies the fact that he is adept at both 
flying and repairing complex aircraft. The day I was there, Chris was 
working on a tail-replacement for an old Cessna aircraft. With his 
thoroughness, Chris had noticed that a factory replacement part sent 
from Cessna, did not match the bent one he was replacing. His call to 
Cessna in Kansas got them scrambling on a potential recall of other 
similar faulty parts.
As Chris and I discussed the installation of a new 
webcam for Redtail Aviation, he was keeping a sharp eye out for the 
expected arrival of a United Parcel Service (UPS) truck. As soon as the 
brown van arrived, Chris swung into action. Although we did install a 
new webcam at Redtail Aviation a few days later, Chris’s duties as the 
Redtail Aviation designated “UPS Air” pilot took precedence. 
 On that October day, the package count was small, fitting easily in the Cessna 182 that Chris then flew to Carbon County Regional Airport, in Price, Utah.
 If the package count had been higher, a larger Cessna was available to 
make the daily flight. That day, Chris signed for the packages, jumped 
into his waiting Cessna and took off for Redtail Aviation’s headquarters
 in Price. There, in the late afternoon, Redtail flights converge. As 
soon as crews can transfer incoming packages to a larger plane, it 
departs for Salt Lake City. From there, a UPS cargo jet takes packages 
from all over Utah to the UPS hub in Louisville, Kentucky. After sorting
 and reloading, packages make their way to destination airports all over
 the country. As early as one business day after departing Moab, Utah, a
 UPS Air package might arrive for delivery in New York City.
On that October day, the package count was small, fitting easily in the Cessna 182 that Chris then flew to Carbon County Regional Airport, in Price, Utah.
 If the package count had been higher, a larger Cessna was available to 
make the daily flight. That day, Chris signed for the packages, jumped 
into his waiting Cessna and took off for Redtail Aviation’s headquarters
 in Price. There, in the late afternoon, Redtail flights converge. As 
soon as crews can transfer incoming packages to a larger plane, it 
departs for Salt Lake City. From there, a UPS cargo jet takes packages 
from all over Utah to the UPS hub in Louisville, Kentucky. After sorting
 and reloading, packages make their way to destination airports all over
 the country. As early as one business day after departing Moab, Utah, a
 UPS Air package might arrive for delivery in New York City. In honor of Redtail Aviation and their role in 
facilitating commerce throughout Utah, I created the video that 
accompanies this article. In the video, I took liberty with Chris’s 
role. Rather than flying away in a Cessna 182, my video has Chris 
departing with his packages in a Grumman Gulfstream jet. We call that, 
“UPS Air, Moab style”.
By James McGillis at 04:58 PM | | Comments (1) | Link

No comments:
Post a Comment